Slips, Trips & Falls on the Job: The Causes & Prevention

Slips, trips, and falls make up a staggering portion of workplace injuries and deaths. Here, we talk about how common they are, and some methods for preventing them.

Data on Slips, Trips, and Falls at Work

According to the Liberty Mutual 2020 Workplace Safety Index, workplace injuries cost businesses $59 billion per year. Falls on the same level are responsible for $10.9 billion of those costs. Falls to a lower level are responsible for another $5.7 billion. Slips and trips without a fall make up still another $2 billion. 

On average, each injury from slips, trips, and falls results in 12 lost workdays. Falls to a lower level are more dangerous and average 18 days of lost work. 

Nonfatal Injuries

Slips, trips, and falls are some of the most common causes of injury in the workplace. According to the Bureau of Labor and Statistics, they caused 240 thousand out of the 900 thousand nonfatal injuries that took place in 2018.

If you’re in the service industry, you might think injuries are less of an issue for you than in manufacturing, but the reality is that out of those slips, trips, and falls, 190 thousand happened in the service industry, while only 50 thousand occurred in the goods production industry.

Within goods production, most slips, trips, and falls happened in the construction and manufacturing industries, with 22 thousand and 24 thousand in each of them respectively. Natural resources and mining still saw 5.6 thousand injuries from them.

Within the service industry, trade, transportation, and utilities saw the most slip, trip, and fall related injuries at 74 thousand. Education and health services came next at 47 thousand. Leisure and hospitality were responsible for 29 thousand, professional and business services for 20 thousand, financial activities for 8.3 thousand, and information services for 4.3 thousand.

Needless to say, no matter what industry you’re doing business in, slips, trips, and falls are an issue you need to be prepared for.

Create a custom mat solution by choosing from our wide selection of laminate, foam and carpet custom length mats.

Slip, Trip, and Fall Prevention

Preventing slips, trips, and falls starts with being Osha compliant. Osha’s requirements for Walking-Working surfaces apply to all industries. We can’t cover everything here, but we will cover some of the most important requirements.


Osha has detailed requirements on the use of ladders and we won’t be able to cover all of them, but here are some of the most important parts:

  • Ladder rungs or steps need to be evenly spaced, parallel, and level with the ground. Each type of ladder has specificing spacing and size requirements that need to be met.
  • Wooden ladders shouldn’t be painted or coated in a way that would hide defects.
  • Metal ladders should be made from corrosion resistant materials.
  • The ladder surface shouldn’t have any laceration or puncture hazards.
  • Ladders should be inspected at the start of each work shift.
  • Compromised ladders need to be immediately labeled as dangerous.
  • Employees always need to face the ladder and keep at least one hand on it while climbing up or down. Employees shouldn’t carry anything that could throw them off balance.
  • Portable, permanent, and mobile ladders each have specific requirements about their design and use that need to be adhered to.


Here are some of the most important OSHA guidelines for stairs.

  • Stairways need handrails, stair rails, and guard rails. 
  • No overhead obstructions within 6 feet 8 inches.
  • Uniform steps
  • Landings and platforms need to be as wide as the steps and at least 30 inches deep with room for doors
  • Stairs should be built to support five times the expected load and a minimum of 1,000 pounds.
  • Spiral, ship, and alternating tread stairs should be avoided if at all feasible

Various more specific requirements are in place for standard, spiral, ship, and alternating tread stairs.

Fall Protection Requirements

OSHA requires that these steps be taken to prevent falls and falling objects.

  • If a surface has an edge with a fall more than 4 feet, it needs to be protected with guard rails, safety nets, or personal fall protection like a harness. If that isn’t feasible, an OSHA compliant fall protection plan needs to be in place.
  • Likewise, hoist areas need to protect employees from a fall of more than 4 feet with a guardrail, personal fall arrest system, or a travel restraint  system. The guidelines are the same for holes except that covers can also be used. 
  • Dockboards need to be protected with guardrails or handrails, unless in use by trained employees using motorized equipment who aren’t at risk of falling more than 10 feet.
  • Runways and similar walkways need to be protected with a guardrail. If it isn’t feasible, a trained employee using a personal fall arrest or travel restraint system is acceptable.
  • Falls into dangerous equipment need to be protected against using a guardrail or travel restraint system.  

Non Slip Mats Can Help Reduce Injuries On The Same Level

While most of the discussion in OSHA guidelines focuses on falls from one platform to another, the reality is that most falls are slips and trips that happen on a single level. And slips on wet or slick surfaces are among the most common causes.

To prevent tracking of rain or snow from outside throughout the building, it is recommended that businesses put at least 15 feet of matting in place. This not only prevents tracking liquid, but debris that can contribute to slipping or tripping.

Anti slip mats are required in any workplace where liquids are expected. They are also recommended anywhere where workers will be regularly shifting their weight and require good traction, including anything from food processing to welding. Oil resistant mats are especially important around heavy machinery or around cooking oil.

Anti slip mats can also help reduce fatigue in workers who need to stand in place for extended periods of time since less energy is needed to keep balance and less strain is put on the feet and legs.

Take a look at options for anti slip mats.